| Benefit |
Optional hot tub cover components |
|
| To reduce your heating bills with
energy savings |
The CONTINUOUS HINGE SEAL extends
the full length of the fold for maximum
insulation and significantly
cuts heating bills, compared to the standard steam stopper
pillows. Customers report the snow no longer melts above the fold! This
upgrade pays for itself many times over by reducing operating costs for
the life of your spa cover. |
 |
| To
reduce heating bills with energy savings |
Further
reduce your heating bills with greater COVER THICKNESS.
Our blog
proves that a 6" - 4" cover with 1.0 pound foam has a higher R-value
(insulating factor) than a higher priced 5" - 3" hot tub
cover with 2.0
pound foam. |
 |
| To extend the life of your spa
cover |
Extend
the life of your hot tub cover by 12 - 18 months with our DOUBLE THICK or BIG
BLUE VAPOR BARRIER
wrap. Most hot tub covers die from water logging due to vapor barrier
failure. This failure will happen eventually to every cover due to
decomposition from spa chemicals, ozonators, etc. Increasing the
thickness causes the deterioriation to take longer. |
 |
| To increase the strength |
Hot
tub covers are not meant to handle loads like kids, pets, wet snow,
etc. However, the strength can be increased for additional protection
by increasing the CORE DENSITY
of the foam in the cover. Additional strength allows greater abuse
before the foam will crack and fail. |
 |
| To close easier with energy
savings |
SPLIT CORNER SKIRTS
allows your spa cover to close more easily so you do not have to walk
around
to each corner to make sure the skirt is not stuck underneath the cover
when it was closed. By splitting the skirt at the corners, the skirt
does not fold underneath the cover when closing and prevents costly
heat loss. |
 |
| For windy settings |
Sometimes
a strap on each of the four sides is not enough. We can an ADDITIONAL 4 STRAPS,
so each side of your hot tub cover has two straps for windy locations. |
 |
