Spa Hot Tub Covers Standard Hot Tub Covers Deluxe Hot Tub Covers Spa Covers Phoenix

0 item(s) in cart / Total: $0.00

Hot Tub Covers & More
	Spa Covers
	Hot Tub Cover Lift
	Spa Supplies and Spa Accessories
Hot Tub Cover Details
	Spa Cover: Choosing
	Hot Tub Cover: Factory Video
	Spa Covers: Features
	Hot Tub Cover: Technical
	Replacement Spa Cover: Colors
	Hot tub covers: Measuring
	Customer Testimonials
	Spa Covers: Info
	Gallery of Hot Tub Covers

Home > Spa Covers

Design-Your-Own - Select each cover component and create your own design!

Design-Your-Own hot tub covers

Price

Your Price:

$0.00

Make Your Selections Below

Base hot tub covers

** REQUIRED - Design-Your-Own base cover including free residential delivery. Base cover is 4'' - 2'' taper with 1.0 pound foam cores [+$284.99]

Hot tub cover shape Preview

Enter dimensions from spa shape illustration above A (in inches) Typically the longer side:

B (in inches):

C (in inches) Guide Me Measuring Tape:

D (in inches) if necessary:

E (in inches) if necessary:

Select fold location

Oversized hot tub cover

Hot tub covers - Color View

Skirt (flap) length View

=============================================================================================

BeyondNice EXCLUSIVE features - Customize your cover! (Descriptions & benefits detailed below)

Add thickness for lower heating bills

Seal across the hinge Compare The CONTINUOUS HINGE SEAL insulates the full width of the hot tub covers hinge for maximum insulation [+$19.00]

Upgraded waterlogging prevention Extending the life of our hot tub covers by 12 - 18 months our DOUBLE THICK VAPOR BARRIER is 4 mil. Most hot tub covers die from waterlogging due to vapor barrier failure from spa chemicals. Your cover will simply last longer! [+$20.00]
Extending the life of our hot tub covers further is our Big Blue Barrier wrap of 5 mil. Designed specifically to retard decay due to spa chemicals we developed this wrap and it is EXCLUSIVE to our hot tub covers. [+$27.00]

Increased strength & insulation

Split corner skirt Compare Splits help prevent the skirt from folding underneath hot tub covers and causing costly heat loss. [+$24.00]

Strengthen the fold & hinge View Prevent this! Add nylon strapping to reinforce the hot tub covers fold/hinge when used with a cover lifter. [+$18.00]

Additional 4 straps Add 4 straps to the standard 4 straps (8 total) [+$17.00]

Corner speaker pockets required?

Comfy, relaxing pillow(s) View

Strap placement Explain Specific placement of tie down straps (optional):

Special Instructions Special Instructions:

Quantity

Description

Benefit	Optional hot tub cover components
To reduce heating bills with energy savings	The CONTINUOUS HINGE SEAL extends the full length of the fold for maximum insulation and significantly cuts heating bills, compared to the standard steam stopper pillows. Customers report the snow no longer melts above the fold! This upgrade pays for itself many times over by reducing operating costs for the life of the cover.
To reduce heating bills with energy savings	Further reduce your heating bills with greater COVER THICKNESS. Our blog proves that a 6" - 4" cover with 1.0 pound foam has a higher R-value (insulating factor) than a higher priced 5" - 3" cover with 2.0 pound foam.
To extend the life of the cover	Extend the life of your hot tub cover by 12 - 18 months with our DOUBLE THICK CORE VAPOR BARRIER wrap. Most hot tub covers die from water logging due to vapor barrier failure. This failure will happen eventually to every cover due to decomposition from spa chemicals, ozonators, etc. Doubling the thickness causes the deterioriation to take longer.
To increase the strength	Hot tub covers are not meant to handle loads like kids, pets, wet snow, etc. However, the strength can be increased for additional protection by increasing the CORE DENSITY of the foam in the cover. Additional strength allows greater abuse before the foam will crack and fail.
To close easier with energy savings	SPLIT CORNER SKIRTS allow the cover to close more easily so you do not have to walk around to each corner to make sure the skirt is not stuck underneath the cover when it was closed. By splitting the skirt at the corners, the skirt does not fold underneath the cover when closing and prevents costly heat loss.
For windy settings	Sometimes a strap on each of the four sides is not enough. We can an ADDITIONAL 4 STRAPS, so each side of the cover has two straps for windy locations.

We will build the cover to your exact dimensions so please be precise when measuring. Accurate measurements ensure a great fitting cover!

As the saying goes, "Measure twice, cut once!"

We ship using freight trucking companies. Please inspect the cover for damage BEFORE signing for it and DO NOT accept it if the cover is damaged.

Related Items


Storage-Straight or Curved Hot Tub Steps

Buy


Hot Tub Steps with Handrail

Buy


Spa cover removal system

Buy

Average Rating

Customer Reviews

MR. 8/1/2011

Reviewed by: Charles K from Fenton, MI.

I checked with a local Spa dealer in my area and they said that I would need to wait 8 to 10 weeks to obtains a new spa cover for my Sundance Spa. When I ordered my spa cover through Beyond Nice, it was delivered to my door within two weeks. Its exactly what I ordered, Its a top quality product and fit perfect, the price was better than what the local spa dealer quoted for a Sundance cover, and I did not need to pick up the spa cover at the store. I had no need to contact customer service at Beyond Nice, they kept me updated by e-mail on the status of my order. I even received a "Thank You" letter from them for purchasing their product. Wow, what a concept! "Give the customer what they want at a reasonable price and a thank you after the purchase." Thank You Beyond Nice!

Write a Review

Email this page to a friend