| Benefit | Optional hot tub cover components | |
| To reduce heating bills with energy savings | The CONTINUOUS HINGE SEAL extends the full length of the fold for maximum insulation and significantly cuts heating bills, compared to the standard steam stopper pillows. Customers report the snow no longer melts above the fold! This upgrade pays for itself many times over by reducing operating costs for the life of the cover. |  |
| To reduce heating bills with energy savings | Further reduce your heating bills with greater COVER THICKNESS. Our blog proves that a 6" - 4" cover with 1.0 pound foam has a higher R-value (insulating factor) than a higher priced 5" - 3" cover with 2.0 pound foam. |  |
| To extend the life of the cover | Extend the life of your hot tub cover by 12 - 18 months with our DOUBLE THICK CORE VAPOR BARRIER wrap. Most hot tub covers die from water logging due to vapor barrier failure. This failure will happen eventually to every cover due to decomposition from spa chemicals, ozonators, etc. Doubling the thickness causes the deterioriation to take longer. |  |
| To increase the strength | Hot tub covers are not meant to handle loads like kids, pets, wet snow, etc. However, the strength can be increased for additional protection by increasing the CORE DENSITY of the foam in the cover. Additional strength allows greater abuse before the foam will crack and fail. |  |
| To close easier with energy savings | SPLIT CORNER SKIRTS allow the cover to close more easily so you do not have to walk around to each corner to make sure the skirt is not stuck underneath the cover when it was closed. By splitting the skirt at the corners, the skirt does not fold underneath the cover when closing and prevents costly heat loss. |  |
| For windy settings | Sometimes a strap on each of the four sides is not enough. We can an ADDITIONAL 4 STRAPS, so each side of the cover has two straps for windy locations. |  |
.jpg)
