Specifications from the manufacturer

• ** CONFIRMATION REQUIRED - The dimensions below are from the spa maker. They are provided as a reference only. BeyondNice can not verify their accuracy. Measure your spa and enter your dimensions.

Model:WHITE WATER SPAS - YORK - Year: Unknown

• Shape: Unknown; A (Length) - ?; B (Width) - ?; C (Corner) - ?; Skirt - ?; Straps - ?; ?=Not provided 0=Unknown

Cover thickness selection

-- Please Select --REQUIRED: Select your cover thickness here. Thicker covers insulate better. BASIC - Standard cover 4 inches thick at center tapering to 2 inch thick at the ends - R16.5 +$284.99DELUXE - cover is 5 inch tapering to 3 inch thick for more insulation - R20.7 +$319.88ULTRA - cover is 6 inches thick tapering to 4 inches for the most insulation available - R24.9 +$326.88

Cover thickness selection *

REQUIRED: Select your cover thickness here. Thicker covers insulate better.   See comparison

• BASIC cover is 4 inches thick at center tapering to 2 inch thick at the ends - R16.5 +$284.99
• DELUXE cover is 5 inches thick tapering to 3 inch thick for more insulation - R20.7 +$328.88
• DELUXE cover 5 inches thick AND FLAT (no taper) - R24.9 +$358.88
• ULTRA cover is 6 inches thick tapering to 4 inches for the most insulation available - R24.9 +$347.88
• ULTRA cover 6 inches thick AND FLAT (no taper) - R29.88 +$371.88

Hot tub cover shape <a toptions='title=Click here to move. Bottom right to size' href=/pics/hot-tub-covers/spa-covers-shapes.jpg><img src=/pics/i/c.gif /> Preview</a>

-- Please Select --Shape selection required Square rounded corners Square Square 4 cut corners Rectangle Rectangle rounded corners Rectangle 4 cut corners Single cut corner Two cut corners Round Hexagon (6 equal sides) Octagon (8 equal sides)

Want help measuring for rounded corners?

• Video Guide
• Photo with Measuring Tape

Enter dimensions from spa shape illustration above

Select fold location

-- Please Select --Selection required Fold side A in half Fold side B in half

Select fold location *

• Fold longer side in half    Help Me
• Fold shorter side in half    Help Me
• Does not matter (Dimension A = Dimension B or Shape is round)    Help Me

Oversize cover - any dimension over 96 inches

• One or both sides over 96 inches up to 102 inches: 1.5# core upgrade +$75.99
• Covers with any dimension over 102 click here

Oversize cover - any dimension over 96 inches

To order a cover with any dimension over 100 inches click here

• One or both sides over 96 inches up to 100 inches: 1.5# core upgrade +$75.99

Hot tub covers - Color <a toptions='title=Click here to move. Bottom right to size' href=/pics/hot-tub-covers/spa-covers-colors.jpg ><img src=/pics/i/c.gif /> View</a>

-- Please Select --Selection required 1 Burgundy 2 Brown 3 Tan 4 Sand 5 Hunter Green 6 Teal 7 Light Blue 8 Navy 9 Old Teak 10 White 11 Light Gray 12 Dark Gray 13 Charcoal 14 Black 15 Walnut

Vinyl color selection *

Click the cameras below to view larger color images, or use our Zoomable color chart

•    Almond
•    Black
•    Blue
•    Brown
•    Burgundy
•    Charcoal
•    Dark Brown
•    Gray
•    Hunter Green
•    Navy
•    Tan
•    Teal

Skirt (flap) length *

See how to measure

-- Please Select --No skirt 1 inch 2 inches 3 inches 4 inches 5 inches 6 inches 7 inches +$15.008 inches +$15.009 inches +$15.0010 inches +$15.00

Skirt (flap) length <a toptions='title=Click here to move. Bottom right to size' href=/pics/hot-tub-covers/spa-covers-measure-skirt-sm.jpg ><img src=/pics/i/c.gif /> View</a>

-- Please Select --Selection required No skirt 1 inch 1.5 inches 2 inches 2.5 inches 3 inches 3.5 inches 4 inches 4.5 inches 5 inches 5.5 inches 6 inches 6.5 inches +$15.007 inches +$15.007.5 inches +$15.008 inches +$15.008.5 inches +$15.009 inches +$15.009.5 inches +$15.0010 inches +$15.00

Additional 4 straps for windy locations

• Add 4 straps to the standard 4 straps (8 total) +$17.00

Tie down straps *

• 4 Straps: 2 Straps on both sides with handles *
• 4 Straps: 2 Straps on both sides that fold in half *
• 8 Straps: 2 Straps on every side, 8 total +$17.00
• 4 Straps: 1 Strap on every side
• 4 Straps: Each at center of rounded corners
• 2 Straps: 1 Strap centered below each handle
• 0 Straps: No tie down straps

* Optional: If specific strap locations are required, specify here

For only the first two choices above, you can enter the distance, in inches, from the nearest cover edge, to the center of the strap. Help Me

Maximum number of characters: 4

Strap placement <a toptions='title=Click here to move. Bottom right to size' href=/pics/hot-tub-covers/hot-tub-covers-tie-down-locations.JPG ><img src=/pics/i/c.gif /> Explain</a>

=============================================================================================

BeyondNice EXCLUSIVE features - Customize your cover! (Descriptions & benefits detailed below)

<a toptions='title=Click here to move. Bottom right to size' href=/pics/hot-tub-covers/spa-covers-hinge-seal.jpg ><img src=/pics/i/c.gif />View</a> Add insulation with a seal across the hinge - adds R-9 insulation

• Standard: Steam stopper pillows
• Upgrade: Full hinge seal +$19.00

Additional insulation *

For maximum insulation, select the Long Steam Stopper below to add R-9 to any cover by preventing heat loss through the fold/hinge area

• Standard: 2 Steam Stopper Pillows View
• Upgrade: Long Steam Stopper - additional insulation seals under the fold View +$19.00

Extend the life of your cover 12-18 months - 82% of covers fail from waterlogging

• Standard: Vapor Barrier
• Upgrade: Double Thick Vapor Barrier View +$20.00
• Upgrade: Big Blue Barrier View +$27.00

Extend the life of your cover a year or more - 82% of covers fail from waterlogging *

• Standard: Vapor Barrier
• Upgrade: Double Thick Vapor Barrier View +$20.00
• Upgrade: Triple Thick Vapor Barrier +$29.00
• Upgrade: Double Thick & Double Wrap - twice as thick as Standard and wrapped twice +$41.00

Increase cover strength to support snow, animals, etc. so the foam does not break

-- Please Select --Standard 1 pound - Shear strength 18-22 psi (Estimated 4-2 taper static load limit - 190 pounds) Deluxe 1.5 pound - Shear strength 26-32 psi (Estimated 4-2 taper static load limit - 270 pounds) +$45.00Ultra Deluxe 2 pound - Shear strength 33-37 psi (Estimated 4-2 taper static load limit - 370 pounds) +$67.00

Increase cover strength with more dense foam cores *

Add strength to support snow, animals, etc. so the foam does not break View

• Standard 1 pound - Shear strength 18-22 psi (Estimated 4-2 taper static load limit - 190 pounds)
• Deluxe 1.5 pound - Shear strength 26-32 psi (Estimated 4-2 taper static load limit - 270 pounds) +$45.00
• Ultra Deluxe 2 pound - Shear strength 33-37 psi (Estimated 4-2 taper static load limit - 370 pounds) +$67.00

Split corner skirts help prevent the skirt folding under the cover and leaking heat

• Standard: Full corner skirt
• Upgrade: Split corner skirt Compare +$24.00

Split corner skirts help prevent the skirt folding under the cover and leaking heat *

• Standard: Full corner skirt
• Upgrade: Split corner skirt View +$24.00

Add strapping to strengthen the fold/hinge when used with a cover lifter <a toptions='title=Click here to move. Bottom right to size' href=/pics/hot-tub-covers/spa-covers-lifter-damage.jpg ><img src=/pics/i/c.gif>Prevent this!</a>

• Standard: No strapping sewn into the fold
• Upgrade: Strengthen the fold/hinge View +$18.00

Reinforce the fold/hinge for additional strength *

Add strapping when a cover lifter is used Prevent this!

• Standard: No strapping sewn into the fold
• Upgrade: Strengthen the fold/hinge View +$18.00

Add internal hardware so Hot Spring lifters can attach to the cover

• Standard: No internal cover lifter attachment hardware
• Upgrade: Add adapter hardware (Info) +$48.50

Are corner speaker pockets required?

• A selection is required for spas with raised speakers View
• 2 corner speaker pockets +$52.00
• 4 corner speaker pockets +$104.00

Are corner speaker pockets required? *

View this picture of a raised speaker

• The hot tub does not have any raised speakers
• 2 corner speaker pockets are required +$172.00
• 4 corner speaker pockets are required +$242.00

For two speaker hot tubs, provide their locations *

• Both speakers are on the same side of the fold
• The fold runs between the speakers

Speaker pocket additional requirements *

If your hot tub has raised speakers, the following are required to correctly manufacture your cover:

A). The complete exterior vinyl skin from your current cover must be sent in
B). All of the dimensions as shown in this illustration
C). The thickness of the current cover, in the middle at the fold and at the thinnest part of the edges

• I confirm my agreement with the speaker pocket requirements explained above

Comfy & matching pillows with strap to sand bag to hold the pillow on the lip

• No pillow(s) - View
• 1 Pillow +$26.00
• 2 Pillows +$48.00
• 3 Pillows +$68.00
• 4 Pillows +$87.00

Manufacturing rush needed? *

Spa covers ship ground via freight carriers, due to their size. UPS and FedEx will not accept them. Rush deliveries are not available with ground carriers. However, we can expedite the MANUFACTURING time if needed. The options are below.

• None - standard production time
• 5 Day production rush +$50.00
• 3 Day production rush +$100.00

How did you find BeyondNice? *

-- Please Select --Amazon Become.com Bing search BizRate Business card Craigslist Facebook Google Advertisement Google Search HotTubCoverPros.com LinkedIn Nextag Other PriceGrabber Pronto Read Article Referral Returning Client Sears Shopping.com Shopzilla Smarter Twitter Yahoo search YouTube

If other, please explain: *

* Required Fields