COVER GENERAL SPECIFICATIONS Vinyl is 26oz. Cold crack is –20 Thread- polymatic, high grade, bonded, 90 oz. With UV inhibitors Vapor barrier is 2mil. Closed-cell expanded polystyrene foam Galvanized steel C-channel, 30% stronger than aluminum Thickness tolerance 1/4" or 0.25" Length & width tolerance 1 inch Standard vapor barrier 2 mil thick Double thick vapor barrier 4 mil thick Big Blue Barrier 4 mil thick but performs like 6 mil thick Tie down strap length 9" is standard; Length specified from bottom of cover; Length includes the strap AND clip Scuff pad Regular vinyl, not overlapping the mesh Octagon formula ( Width * 33 ) divided by 80 = cut corner sizes Deck/flush install, add 4” to each side min.
Scuff pad req’d on LARGE, deck installed covers or warranty is void!4-2 slope 1# foam weighs 40#, add 4#’s for 1.5# or 2# foam
5-3 slope 1# foam weighs 42#, add 4#’s for 1.5# or 2# foam
6-4 slope 1# foam weighs 44#, add 4#’s for 1.5# or 2# foamFREIGHT – 2 or more to same address 1st cover full price, 2nd
one ½ freight ½ price MULTIPLE COVERS TO SAME DELIVERY ADDRESS:
FL, GA, LA, AL, TN, SC, NC and MS - up to 4 for
the price of 1
Everywhere else, up to 2 for the price of 1CLASSIC COVERS Standard (up to 96” X 96”) $174 Oversize cover >96” up to 102”; Round cover, 102” diameter $226 or add $37 3 Piece cover >102” to 144” (1.0 LB foam)
B). All 3 pieces sewn together
C). All 3 pieces separate (butt & flap)
D). 2 sewn and 3rd butt up against w
flap
Can be either all 3 flat foam or ends tapered with middle piece flat
Max non Walk On size 102 X 102; If >102 X >102, must be flat, non-tapering.The middle panel has tie down straps on each end. The attached end panel will have one tie down on the handle end. The loose panel will have tie down straps on each of the three exposed sides.
There are tie downs (unless ordered without) and a 5" flap that extends from the middle panel over the gap between the individual panel and the middle panel.Up to 102 X 102 can be made 2 panel with 1.5 pound foam cores $196 3 Pc
cover 102” to 144” (1.0 LB foam) 4/2 $287 3 Pc
cover 102” to 144” (1.0 LB foam) 5/3 $312 3 Pc
cover 102” to 144” (1.0 LB foam) 6/4 $341 4 Piece cover >144” to 192”(1.5 LB foam) $445 Walk-On (Max 8’, ~60#, R6.27) $445 Walk-On 3 panel (Max 102 – 144 inches by 96 or less) $671 Walk-On 4 panel (Max 144 – 192 inches by 96 or less) $883 Walk-On (one side must be <12’ the other length can go as big as you want. Must be custom quoted! Soft Cover $169.88 delivered SPA CAP 7 X 7 X 12 Shipped with foam cover - $63
Shipped alone - $837’ Octagon/Round tub Shipped with foam cover - $63
Shipped alone - $838 X 8 X 12 Shipped with foam cover - $72
Shipped alone - $92COVER UPGRADES AND OPTIONS 5” to 3” taper $38 6” to 4” taper $52 FLAT covers, 4” $12 FLAT covers, 5” $12 FLAT covers, 6” $33 1.5# foam $45 2.0# foam $67 Double-thick wrap $20 Big Blue Barrier Double-thick wrap $27 Continuous hinge seal - has Velcro at one end for access/replacement $19 Reinforced hinge $18 Skirt length over 6” $15 Split corner skirt $24 Split skirt (2 splits per corner) $57 Pleated split skirt $60 Addt’l 4 straps with locks (8 total) $17 Inside handles (NOT WARRANTEED) $15 Eco-Cover
Bundle - 1). Continuous hinge seal 2). 8 tie down straps (not
configurable) 3). Extra steam stopper pillows 4). Cover has
softer bottom to seal to tub lip $65 Scuff pad - protects cover bottoms if sitting on stone coping, etc. $98 Pillow - matching vinyl $26 Hot Springs cover supports - internal hardware for attachment $48.50 Rubber handles $14 Template / kidney charge (w/in 8’X8’) $79 COVER COMPONENTS SOLD SEPARATLY Vinyl skin ONLY $168 delivered 4-2 slope insert (each) $65 5-3 slope insert (each) $78 6-4 slope insert (each) $90 30 X 48 piece of vinyl $24 plus shipping Replacement air bladder $25 plus shipping COVER CUSTOMIZATIONS Cut outs and dig outs - for control panels, air vents, etc. 1-2 - $21; for 3-4 - $31 2 Speaker “boots” (LA SPA have templ) $52 per pair of speakers 2 Speaker “cut outs” $52 per pair of speakers