As featured on...
End freight damage with our patented UPS/FedEx deliverable cover!
Thank You!
We’ll Be In Contact Soon!
(970) 703-3074
CUSTOMER SERVICE INFORMATION
| Contact Info |
BeyondNice.com
Phone: 970-703-3074 Fax: 561-423-2667 |
|
| Upgrades | Details and Pricing |
|
| Cover pricing | BN COVER PRICING - View standard BN prices here 4-2 BN: $274.99 ebay: Auction starting: $163.88 BIN: $180.88 5-3 BN: $309.88 ebay: Auction starting: $194.88 BIN: $214.88 5-3 BN: $316.88 ebay: Auction starting: $214.88 BIN: $236.88 EBAY STORE EBAY FREIGHT MAP |
|
| Component Information | View greater detail and specific data for phone calls: Component Data | |
| Delivery |
|
|
| Measuring | ||
| Ebay specifics | Pay
for item first, THEN we will email our online ordering directions Our online ordering system is at www.BeyondNice.INFO iPad, Mac, Safari, Linux computer ordering is at http://www.beyondnicestore.com/old_order.html Upgrade selection and pricing is available at www.beyondnice.com/upgrades-and-options |
|
| Info by topic | ||
| R-Values | Sometimes a strap on each of the four sides is not enough. We can add an ADDITIONAL 4 STRAPS, so each side of the cover has two straps for windy locations. | |
| For covers used with a cover lifter | Our
REINFORCED
HINGE
is designed specifically to add strength to the cover when used with a
cover lifter. We add reinforcement to the fold/hinge to increase it's
strength when used with a fold over type cover lifter. These lifters
"hang" the cover from it's hinge over the lifter bar, and can wear on
the hinge over time. This upgrade adds nylon webbing which is sewn into
the hinge. It is made from the same strapping used for the tie down
straps and handles. The nylon strap is sewn interntally into the hinge
area, making a multilayer hinge. $18
|
|
| For deck installed hot tubs | The Ultimate "WALK ON COVER" will
support about 400 pounds. The construction is exactly the same as our
Standard cover but a laminated fiberglass sheet is attached to the
core. This cover weighs approximately 100 pounds where our Standard
cover weighs approximately 40 pounds. This cover is useful for spas
that are installed into a deck, flush with the walking surface or for
locations with heavy snow or large pets. $415
|
|
| Matching pillows | We
can add a MATCHING
PILLOW or two to your order, and you won't have to pay
additional shipping! Our pillows are covered with the same vinyl used
for your cover so they match perfectly. They are made just like our
covers except for the soft foam middle. The foam is wrapped in vapor
barrier to prevent waterlogging. The vinyl has a mesh to allow water to
drip from the pillow. Each pillow comes with a strap to a counter weight so your pillow will stay in place on the edge of the hot tub. The counter weight is like a sand bag and hangs down outside the cabinet of the hot tub. 1 -
$26 2 - $48
3 - $68
4 - $87
|
|
| Cover lifter removal system |
The SPA COVER LIFTER removal system makes it easy to remove and recover your spa cover. Your spa cover is stored safely off the ground and in a low storage position to avoid falling over. Our lifter is made in the U.S.A. with the thickest tubing and no lead paint! Low Storage Position - This safe low storage cover removal design is customer preferred and is especially important for spas with heavier 1.5 and 2 lb density foam covers. Patent # 5974599 Torsion Springs - The torsion springs support the cover weight, ease shock load and assist in transition. VersaMount Brackets -
can be attached to the deck or cabinet. We also have optional aluminum
mounting plates that slide under the spa for an easier, less intrusive
installation. Patent #6158063 $139 |
|
| "How To" Videos | Ebay:
BeyondNice:
HotTubCoverDepot: EbayEase:
|