As featured on...Amazon.com logo Home Depot logo Houzz logo Sears logo Walmart logo Wayfair logo

Michael Phelps Signature Swim Spas - MP Impact

Michael Phelps Signature Swim Spas - MP Impact

Be the first to review this product

Availability: In stock

$0.00

Customize Your Cover

Quick Overview

Model: Michael Phelps Signature Swim Spas - MP Impact - Year: Unknown

Replacement Hot Tub Spa Covers for the Michael Phelps Signature Swim Spas - MP Impact. Largest U.S. manufacturer. Lowest price guaranteed. 970-703-3074

Shape: Rounded Rectangle; A (Length) - 174; B (Width) - 94; C (Corner) - 0; Skirt - 0; Straps - 0; ? - Dimensions not provided 0 - Unknown or variable dimension

The dimensions above are from the spa maker. They are provided as a reference only. BeyondNice can not verify their accuracy. Please measure your spa and enter your exact dimensions - over 80% of the covers we manufacture are made from client provided measurements.

Make Your Selections

View example
A). The center two panels will be flat and not tapering. For example, if your order is for a 4-2 cover, the two center panels will be 4 inches thick and flat
B). Both end panels will taper from the center panel thickness out, dropping 2 inches to the end of the cover
C). Each outer pair of panels will be attached with a hinge/fold between the two panels
D). The center, where the 2 two panel assemblies will butt up to each other, have a 4 inch flap to cover the joint, so rain cannot get in
E). The tie down straps will be located on each end of the center panels, and on all 3 sides of the end panels

REQUIRED: Select your cover thickness here. Thicker covers insulate better.

Preview All Shapes Below is the shape for this model as specified by the spa manufacturer. If this is not accurate for your spa, contact us.

Measure the overall length, ignoring the corners and entering fractions such as 88 1/2 as 88.5 Measuring your cover    Measuring your hot tub

Measure the overall length, ignoring the corners and entering fractions such as 88 1/2 as 88.5 Measuring your cover    Measuring your hot tub

Rounded corners? Help Me    Photo with Measuring Tape    Video Guide    Calculator    Cut corners? Photo with Measuring Tape

Click any camera below for a larger color swatch. When two shades are shown, orders will be fulfilled based on color availability.

We are the only store offering woven fabric looking vinyl! See the swatches below for a new, upscale looking cover. Brown Close Up Gray Close Up
Fabric Look Vinyls: BROWN: Front    Corner    Side     GRAY: Front    Corner    Side

Select one from below:

See how to measure

For maximum insulation, select the Long Steam Stopper below to add R-9 to any cover by preventing heat loss through the fold/hinge area

Add strength to support snow, animals, etc. so the foam does not break View

Add strapping when a cover lifter is used Prevent this!

Customize the look of your cover by selecting from the following handle styles. View Comparison The handle under the skirt is stronger and lasts longer because it is protected from the weather.

Are there raised controls, vents, handles or is a template required? Control Panel Air Vent Handle.

* Note: BeyondNice covers are not compatible with Hot Spring and other cover lifters that require mounting screws attaching into the cover.
* Note: BeyondNice does not make covers for spas with raised speakers.
* Note: BeyondNice does not make covers that are inset into the top of the hot tub.

Each BeyondNice cover is custom manufactured once ordered. As you are probably aware, it has become exceedingly difficult for manufacturers to obtain raw materials. Consequently, production lead time is only a rough estimate. However, our whole team would truly appreciate your order today to help us recover quickly once this passes. As of 1/1/23, we estimate about 6 weeks from order date to shipment.

Rush shipping is not available. However, we can expedite the MANUFACTURING time if needed. For orders requiring special order foam, the production rush begins once the foam is received. The options are below.

View a gray cap View a chocolate cap Inexpensive spa cover caps are made to safeguard the more expensive insulating hard covers and increase their service life. Many prefer the woven fabric look of spa caps to vinyl. Save $15 now by including a heavy duty spa cap with your order. Select the color of your choice after making a cap type selection below.

  • * Great looking water repellent fabric with coated backing View
  • * Heavy weight 600 x 300 woven polyester fabric, not cheap or thin View
  • * Ships in the box with your insulating hard cover
  • * Easy on and easy off design either made to fit with elastic or adjustable with strap Elastic Adjustable strap
  • * One year limited warranty
  • * Made in U.S.A. View

* Required Fields

Details

Replacement Hot Tub & Spa Covers for Michael Phelps Signature Swim Spas - MP Impact. Largest U.S. manufacturer. Lowest price guaranteed. 970-703-3074



Trouble with Add to Cart?


If you are clicking Add to Cart and nothing is happening, page up. Most likely you missed one of the required fields above. Page up and it will be highlighted.
$0.00