Sundance Spas - Design-Your-Own - Select each cover component and create your own design! From R-15.51 to R-26.8

Standard or Oversize cover *
OVER 100 INCHES: If any dimension exceeds 100 inches, click here to proceed, otherwise continue below

STANDARD SIZE: All dimensions under 96 inches (length, width or diameter for round)

OVERSIZE: Length & width (or diameter) 96 inches or longer up to 100 inches require special order foam and are considered "Extreme Length" by freight companies which add charges of $175

Standard: Length (folds in half) or diameter is less than 96 inches - Made with 1.0# foam density - A stronger foam upgrade is not required
OVERSIZE: Length AND width (or diameter) 96 up to 100 inches: Upgrade to special order 1.5# foam density & Extreme Length shipping +$250.99
OVERSIZE: Length AND width (or diameter) 96 up to 100 inches: Upgrade to special order 2.0# foam density & Extreme Length shipping +$277.99

Hot tub cover shape * Preview the available shapes first, then make your selection from the list below.

Dimension A (in inches) Typically the longer side * Measure the overall length, ignoring the corners and entering fractions such as 88 1/2 as 88.5 Measuring your cover Measuring your hot tub

Dimension B (in inches) * Measure the overall length, ignoring the corners and entering fractions such as 88 1/2 as 88.5 Measuring your cover Measuring your hot tub

Dimension C (in inches) * Rounded corners? Help Me Photo with Measuring Tape Video Guide Calculator Cut corners? Photo with Measuring Tape

Dimension D (in inches) * Measure as shown by the line in the illustration above Measuring your cover

Dimension E (in inches) * Measure as shown by the line in the illustration above Measuring your cover

Select fold location *

Fold longer side in half Help Me The fold itself will be the length of the shorter side
Fold shorter side in half Help Me The fold itself will be the length of the longer side
Does not matter (Dimension A = Dimension B or Shape is round) Help Me

Vinyl color selection * Click any camera below for a larger color swatch. When two shades are shown, orders will be fulfilled based on color availability. Weather Defender is a woven, all weather fabric and a fresh alternative to the conventional vinyl look. It is up to 3 times stronger, tear and abrasion resistant, with about a 25% reduction in weight. All Weather Defender covers are manufactured with the long steam stopper upgrade. View a Black Weather Defender cover Select below:

Skirt (flap) length * See how to measure

Tie down straps *

4 Straps: 2 Straps on both sides with handles * View
4 Straps: 2 Straps on both sides that fold in half (Not for round covers) * View
8 Straps: 2 Straps on every side, 8 total * View +$17.00
4 Straps: 1 Strap on every side. Round covers have 2 straps total * View
4 Straps: Each at center of rounded corners (Not for round covers) * View
2 Straps: 1 Strap centered below each handle * View
0 Straps: No tie down straps

Strap Length * Straps that hold the cover down tightly are very important for sealing in heat. Adjustable straps work great with existing hardware.

Standard: Fixed length straps: 10" from bottom of cover to end of clip
Upgrade: Adjustable straps - length adjusts from 6 1/2" to 10" from bottom of cover to end of clip +$9.00
Upgrade: Adjustable straps - length adjusts from 10" to 20" from bottom of cover to end of clip +$14.00

* Optional: If specific strap locations are required, specify here For only the first two choices above, you can enter the distance, in inches, from the nearest cover edge, to the center of the strap. Help Me: Characters left: 6

Additional insulation * For maximum insulation, select the Long Steam Stopper below to add R-9 to any cover by preventing heat loss through the fold/hinge area

Standard: 2 Steam Stopper Pillows View
Upgrade: Long Steam Stopper - additional insulation seals under the fold View +$39.00

Extend the life of your cover a year or more - 82% of covers fail from waterlogging *

Standard: Vapor Barrier
Upgrade: Double Thick Vapor Barrier View +$20.00
Upgrade: Triple Thick Vapor Barrier +$29.00
Upgrade: Double Thick & Double Wrap - twice as thick as Standard and wrapped twice +$41.00

Split corner skirt * Split corner skirts help prevent the skirt folding under the cover and leaking heat

Standard: Full corner skirt
Upgrade: Split corner skirt View +$24.00

Reinforce the fold/hinge for additional strength * Add strapping when a cover lifter is used Prevent this!

Standard: No strapping sewn into the fold
Upgrade: Strengthen the fold/hinge View +$18.00

Select the handle style * Customize the look of your cover by selecting from the following handle styles. View Comparison The handle under the skirt is stronger and lasts longer because it is protected from the weather.

Under the Skirt - Stronger handles hidden behind the skirt for a clean, unobtrusive look View
Edge - Handles located on the edges of the cover View +$8.00

Must the cover be made to fit around special features of the hot tub? * Are there raised controls, vents, handles or is a template required? Control Panel Air Vent Handle. * Note: BeyondNice covers are not compatible with Hot Spring and other cover lifters that require mounting screws attaching into the cover. * Note: BeyondNice does not make covers for spas with raised speakers. * Note: BeyondNice does not make covers that are inset into the top of the hot tub.

No, the cover does not need any special features
Yes, the cover requires special feature(s) such as cut outs, dig outs, flaps, etc. +$142.00

Please explain: *: Characters left: 50

Production lead time notice *
Each BeyondNice cover is custom manufactured once ordered. As you are probably aware, it has become exceedingly difficult for manufacturers to obtain raw materials. Consequently, production lead time is only a rough estimate. However, our whole team would truly appreciate your order today to help us recover quickly once this passes. As of 9/1/25, we estimate about 3 weeks from order date to shipment.

I acknowledge this notice

Manufacturing rush needed? * Rush shipping is not available. However, we can expedite the MANUFACTURING time if needed. For orders requiring special order foam, the production rush begins once the foam is received. The options are below.

None - standard production time
10 Day production rush +$100.00
5 Day production rush +$175.00

If other, please explain: *

How did you find BeyondNice? *

Sundance Spas: Cover for all models - add dimensions and order

Customize Your Cover

Quick Overview

Make Your Selections

Details

Hot Tub & Spa Covers - Largest U.S. manufacturer. Lowest price guaranteed. 970-703-3074

Trouble with Add to Cart?